Welcome to Ask the Pole Barn Guru – where you can ask questions about building topics, with answers posted on Mondays. With many questions to answer, please be patient to watch for yours to come up on a future Monday segment. If you want a quick answer, please be sure to send from a “reply-able” email address.
Email all questions to: PoleBarnGuru@HansenPoleBuildings.com
DEAR POLE BARN GURU: I am looking for alternatives to the standard hex head and separate washer pole building steel screw. I have been told that Hansen Buildings has some new ideas. Is there anywhere on the net I can research these (or other good fasteners), or do I have to contact a Hansen salesman? I have already found Atlas International, btw. Thanks JIM in ROCHESTER
DEAR ROCHESTER: Without knowing exactly what your objection is to the fairly industry standard screws, it is difficult to properly address the concerns you may be having. I’ve seen many alternative screws, however have yet to hear raving reports back as to ease of installation or satisfactory performance.
Generally people who are looking for an alternative have had issues with either the neoprene rubber gasket decaying (resulting in leaks), the paint chipping off from the screw heads, or the screws themselves rusting.
Years ago we went to using a screw which offers the ease of installation of the standard ¼” hex head – but with many improvements. Featuring EPDM gaskets, powder coating, and JS500 plating, the manufacturer guarantees these screws will outlive the steel they are attaching.
DEAR POLE BARN GURU: I am constructing a pole barn with treated, round poles. It is not clear to me however, the best method to attach roofing girts to the poles. I have seen pictures in books of “circular spike grids” that attach to both the poles and girts, but none of the building supply places carry these here. Do I have to notch out the poles or can I just use lag bolts or carriage bolts? Thanks! MISPLACED IN MISSISSIPPI
DEAR MISPLACED: You have just discovered one of the many reasons to not construct pole buildings using round poles – they are difficult to build with. By the time you project is completed, you will have chewed up enough extra time, energy and effort to have made paying for dimensional posts (4×6, 6×6, etc.) a bargain.
Back to the problem at hand…flat to flat is going to give the most solid connection. I’d recommend cutting the posts to give flat surfaces at all connections. Assuming the posts are treated with preservative chemicals, be sure to wear all appropriate safety gear when cutting.
Unless countersunk (adding more time and effort) lags or carriage bolts have heads which will protrude and cause problems when it is time to install siding.