NEW Hansen Pole Buildings’ Shed and Wing Rafters

NEW Hansen Pole Buildings’ Shed and Wing Rafters

For most people, provided their main building eave height is adequate, placing an attached shed roof on one or both sides seems to be a simple task. With monitor (also known as raised center) style rooflines, shed (wing) roofs are placed on each sidewall, with high end of shed below center eave height.

Well, this is not nearly as simple as one might originally believe.

Main building sidewall and corner columns and their footings, must be engineered to account for roof live (or snow) and dead loads being added by shed/wing roofs. In snow country, drift zone on side of ridge opposite shed/wing become greater in width.

When top of shed comes in below main roof eave height, shed rafters and roof purlins near high end require some added engineering. This is needed to account for both snow sliding off taller roof and for drifting against knee wall created above high end of wing.

Some thoughts on monitor roofs in high snow ca be found here: https://www.hansenpolebuildings.com/2015/05/monitor/

Shed off endwalls have their own unique set of circumstances, as they must be designed to account for snow blowing off entire main roof. This can create tremendous drift loads on top of end sheds. This is one reason to consider an extension of main roofline, rather than an end shed. Other reasons are increased clear height and ease of assembly.

Typically shed/wing rafters had been either as many as two #2 graded dimensional lumber rafters on each side of columns or very expensive LVLs.

By bringing into our inventory very high graded MSR lumber, it allows our engineers to do more with fewer pieces, greatly simplifying construction.

Previously, these rafters were connected to columns by use of a plethora of nails and often required a bearing block to be added below (with even more nails). Now, Simpson SDWS16300 structural screws can be used, greatly reducing number of required fasteners.

Fewer parts, fewer fasteners leading to a quicker to assemble and reliable structural system.

Call 1.866.200.9657 TODAY to participate in “The Ultimate Post-Frame Building Experience”.

And, don’t forget to watch for our next article!

Leave a Reply

Your email address will not be published. Required fields are marked *