Tag Archives: 29 gauge

Engineered Design, Steel Gauges, and Instant Pricing!

DEAR POLE BARN GURU: I am building a pole barn with rafters at 16″ OC. We sheeted the roof and sides of it.

The building is 16′ wide with and engineered ridge pole.

Do I need knee bracing at each of the posts along the walls? Can I skip putting the bracing on the corners? Can I skip the knee bracing altogether?

Thanks. BRIAN in LEXINGTON

DEAR BRIAN: First, here is some reading about knee braces: https://www.hansenpolebuildings.com/2012/01/post-frame-construction-knee-braces/

You mention you have an engineered ridge pole, in order for it to be engineered it must mean the engineer of record who designed your building specified it. Otherwise, it is just a piece of building material. As such, you should contact the engineer who did your plans as he or she is the only one who can make the determination as to the need or lack thereof for the knee braces on your building.

If an engineer did not design your building, the best recommendation is to take what you have done so far to an engineer, have them review it and make a determination as to which path you should carry on from here.

 

DEAR POLE BARN GURU: Can you give me some information on what kind of metal you use and what options are available? For example, if I am building a commercial shop building, what gauge do you offer, what profiles do you have, (low rib – high rib), do you make the metal yourself or who do you get that from? Do you get it from my local lumberyard?

Thanks for your time? JUSTIN

DEAR JUSTIN: Our most commonly used product is 29 gauge three foot net coverage panels with 3/4 inch high ribs nine inches on center. Chances are we can provide pretty much whatever you are in search of on your new Hansen Pole Building – we can provide a myriad of gauges (although 29 gauge will generally carry most any load being applied to it) and profiles, as well as numerous options for the warranty on the paint finishes.

We do not manufacture, we buy very well and at wholesale from several of the major manufacturers – primarily American Building Components and Fabral, with some product also from manufacturers such as Central States, McElroy and Union Corrugating. All of our steel vendors are long established firms with reputations from excellent quality and superior service. We do not purchase from “ma and pa” roll formers, nor do we use or offer seconds.

And no, we do not get our steel from your local lumberyard – chances are good we could sell steel to them, at prices lower than what they pay for it.

DEAR POLE BARN GURU: I’m looking for a place that I can look at the metal buildings as well as floor plans. KYM in CLARKSVILLE

DEAR KYM: There are lots of photos of finished post frame “metal” buildings available to look at here: https://www.hansenpolebuildings.com/gallery/.

The beauty of most post frame buildings is, unless you actually want to have interior columns, they can be clearspanned which allows you to place any desired interior walls pretty much wherever you would like them.