Dear Guru: Can I Add Radiant Barrier?

Welcome to Ask the Pole Barn Guru – where you can ask questions about building topics, with answers posted on Mondays.  With many questions to answer, please be patient to watch for yours to come up on a future Monday segment.  If you want a quick answer, please be sure to answer with a “reply-able” email address.

Email all questions to: PoleBarnGuru@HansenPoleBuildings.com

 

DEAR POLE BARN GURU: I have an existing pole barn. Can a radiant barrier be added to the roof from the inside rather than taking the roof off and reinstalling? Thanks. CONSIDERING IN COUNCIL BLUFFS

DEAR CONSIDERING: Yes a radiant barrier can be installed from the inside. In order to be effective, it is essential to seal it tightly along all edges and seams.

I like products which come with adhesive tabs along one edge, for sealing to the next roll without having to use tape. Check out: www.buyreflectiveinsulation.com

 

DEAR POLE BARN GURU: I have an existing pole barn. I want to stop wind from coming in where the corrugated metal meets the trim at the top and bottom of the siding and wainscot. Would closure strips work for this? Or would housewrap be better. Can I add housewrap from the inside? Or do I have to pull the steel, wainscot, and trim off, wrap and reinstall? Thanks. INTERESTING IN IOWA

DEAR INTERESTING: In order to properly place closure strips, the building will now have to be stripped down to pretty much bare wall framing.

This is probably not the answer you wanted to hear, but the best way to solve your issues is to remove all of the siding, wainscot and wall trims and install a high quality house wrap AND install closed cell closure strips at every point possible. For the top of the angled panels on the endwalls, Hansen Pole Buildings has available a strip which expands to one inch square to entirely fill either beneath the tops of the panels, as well as between panels and rake trims. The same expanding closure also works well for beneath tops and bottoms of Outside Corner trims.

You can read more about housewrap here:

https://www.hansenpolebuildings.com/blog/2012/11/house-wrap/

 

DEAR POLE BARN GURU: Good afternoon, have you built any Fire Stations? if so pictures and cost, Thanks. DECIDING IN DELMAR

DEAR DECIDING: Thank you very much for your interest. As we are not contractors, we have not built fire stations (or any buildings) for anyone, anywhere. We have designed, provided the structural plans, delivered materials, provided assembly instructions and technical support for many. Because we do not do the construction ourselves, we are not onsite when the projects are completed, we have to rely upon our clients to send us photos – it turns out those we have received from our fire station customers are very limited. As to costs, those depend greatly upon the needs of the individual Fire Departments. Every building we provide is custom designed to best fit those needs. You might enjoy reading this article:

https://www.hansenpolebuildings.com/blog/2014/07/fire-stations/

To get the most accurate price quote on a new fire station (or any pole building for that matter), please go to our website and fill out the Request a Quote Form

https://www.hansenpolebuildings.com/freequote.htm

Leave a Reply

Your email address will not be published. Required fields are marked *